Fluke Norma 4000, 5000 | | | Fluke Norma 4000, 5000
- High Precision Power Analyzers -
“ 전력전자 시스템 개발과 테스트를 위한 고정밀 측정장비 ”
※ 응용분야
• 전기모터와 인버터드라이브: 세밀한 스펙트럼 분석과 동적인 토크 계산능력으로 인버터에 의한 손실과 고주파에서 토크 과도현상과 고조파를 정확하게 측정할 수 있습니다.
• 인버터 구동시스템: 한 개의 창에서 모든 전기, 기계적 전력요소를 동시에 측정하여 한 요소가 다른, 또는 전체 시스템에 미치는 영향을 쉽게 파악할 수 있습니다.
• 조명시스템: 10MHz의 광대역과 1MHz의 샘플링속도로 안정기 출력에서의 세밀한 신호분석이 가능합니다. 독특한 션트기술로 고주파에서의 전력측정이 가능하며, 입출력 동시측정으로 안정기 손실률을 바로 확인할 수 있습니다.
• 변압기: 6상을 동시에 측정하여, 매우 낮은 PF를 가지고 있는 큰 변압기의 효율과 손실도 정확하게 계산합니다. 또 변압기 코일의 여러 상에서의 저항 값도 동시에 확인이 가능합니다.
• 자동차: 전기적 입력과 기계적 출력을 동시에 측정하여, 각 요소요소 뿐만 아니라 전체 구동시스템의 효율 및 손실을 한 눈에 확인할 수 있습니다.
※ 제품별 특징
• Fluke Norma 4000: 현장용 테스트 장비로 1~3개의 입출력을 볼 수 있으며, 5.7inch 디스플레이창, 고조파분석, 스코프모드, 벡터 다이어그램, 레코드기능, NormaView 소프트웨어, 확장이 가능한 4MB 메모리
• Fluke Norma 5000: 출시된 전력분석계 중 가장 높은 주파수대역을 가지고 있기 때문에, 주파수변환기나 조명장비의 개발에 가장 이상적인테스트, 분석 장비입니다. 3~6개의 phase를 가지며, 옵션으로 내부프린터가 가능하며 Norma 4000의 특징을 모두 포함합니다.
※ Norma 시리즈 특징
• 모든 상을 동시에 측정하여 특정시간에서의 이벤트를 정확하게 파악할 수 있습니다.
• 모든 입력단자가 서로 완벽하게 절연되어 있습니다.
• 40th의 전압, 전류, 전력의 고조파 분석이 가능합니다.
• FFT 분석, 벡터 다이어그램, 디지털 오실로스코프 기능이 탑재되어 있습니다.
• 15ms에서 3600s 까지 다양하게 평균시간을 설정할 수 있습니다.
• 4MB의 메모리가 장착되며, 128MB까지 확장이 가능합니다.
• 인터페이스 – RS232,와 USB가 기본 장착되며, 옵션으로 IEEE488, Ethernet, USB2.0을 선택할 수 있습니다.
• 외부센서로 토크나 스피드를 측정하려면 Pl1 인터페이스를 선택하십시오.
• 세밀한 분석을 위한 341kHz와 1MHz의 샘플링속도
• DC에서 3MHz, 10MHz의 주파수대역
• 데이터 다운로드, 분석, 보고서작성을 위한 NormaView 소프트웨어 |
※ 제품구성
모델명
| 구성품
| Norma 4000/5000
| 전원케이블 5.7inch 디스플레이 RS232/USB 인터페이스 Fluke NormaView 소프트웨어 사용자메뉴얼 Test Certificate Calibration values |
※ 인터페이스, 옵션
모델명
| 설명
| Fluke-N4K 1PP42
| | Fluke-Norma 4000, single phase with PP42 power phase input module |
| Fluke-N4K 3PP42
| | Fluke-Norma 4000, three phase with 3xPP42 power phase input modules |
| Fluke-N4K 3PP42I
| | Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N4K 3PP42IP
| | Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N4K 3PP42B
| | Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with current binding post |
| Fluke-N4K 3PP42IB
| | Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface |
| Fluke-N4K 3PP42IPB
| | Fluke-Norma 4000, three phase with 3xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N4K 3PP50
| | Fluke-Norma 4000, three phase with 3xPP50 power phase input modules |
| Fluke-N4K 3PP50I
| | Fluke-Norma 4000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N4K 3PP50IP
| | Fluke-Norma 4000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N4K 3PP52IB
| | Fluke-Norma 4000, three phase with 3xPP52 power phase input modules with current binding post with IEEE488 / Ethernet interface |
| Fluke-N4K 3PP54I
| | Fluke-Norma 4000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N4K 3PP54IP
| | Fluke-Norma 4000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 3PP50
| | Fluke-Norma 5000, three phase with 3xPP50 power phase input modules |
| Fluke-N5K 3PP50I
| | Fluke-Norma 5000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N5K 3PP50IP
| | Fluke-Norma 5000, three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 3PP54
| | Fluke-Norma 5000, three phase with 3xPP54 power phase input modules |
| Fluke-N5K 3PP54I
| | Fluke-Norma 5000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N5K 3PP54R
| | Fluke-Norma 5000, three phase with 3xPP54 power phase input modules and printer |
| Fluke-N5K 3PP54IP
| | Fluke-Norma 5000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 3PP54IR
| | Fluke-Norma 5000, three phase with 3xPP54 power phase input modules with IEEE488 / Ethernet interface and printer |
| Fluke-N5K 3PP64
| | Fluke-Norma 5000, three phase with 3xPP64 power phase input modules |
| Fluke-N5K 3PP64I
| | Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N5K 3PP64IP
| | Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 3PP64R
| | Fluke-Norma 5000, three phase with 3xPP64 power phase input modules and printer |
| Fluke-N5K 3PP64IR
| | Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and printer |
| Fluke-N5K 3PP64IPR
| | Fluke-Norma 5000, three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer |
| Fluke-N5K 4PP54
| | Fluke-Norma 5000, three phase with 4xPP54 power phase input modules |
| Fluke-N5K 4PP54IP
| | Fluke-Norma 5000, three phase with 4xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 6PP42IB
| | Fluke-Norma 5000, three phase with 6xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface |
| Fluke-N5K 6PP42IBR
| | Fluke-Norma 5000, three phase with 6xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface and printer |
| Fluke-N5K 6PP50IP
| | Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 6PP50IR
| | Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and printer |
| Fluke-N5K 6PP50IPR
| | Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer |
| Fluke-N5K 6PP50I
| | Fluke-Norma 5000, three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N5K 6PP54I
| | Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N5K 6PP54IP
| | Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 6PP54IR
| | Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and printer |
| Fluke-N5K 6PP54IPR
| | Fluke-Norma 5000, three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer |
| Fluke-N5K 6PP64I
| | Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface |
| Fluke-N5K 6PP64IP
| | Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels |
| Fluke-N5K 6PP64IR
| | Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and printer |
| Fluke-N5K 6PP64IPR
| | Fluke-Norma 5000, three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer |
|
※ 악세서리
Rack Mounts & Hardware
| Fluke-N4K Rack Kit
|
| Fluke-N5K Rack Kit
|
|
Batteries, Chargers & Adapters
| WYE Adaptor
| Fluke Norma WYE Adaptor (external accessory box) |
Options
| 32 A Planar Shunt
| 32 A Planar Shunt | Cables for 32 A Planar Shunt
| Cables for 32 A Planar Shunt | 10 A Traxial Shunt
| Traxial Shunt | 30 A Traxial Shunt
| Traxial Shunt | 100 A Shunt
| 100 A Shunt with Cables (0.001 Ω, 0 to 0.5 MHz) | 150 A Shunt
| 150 A Shunt with Cables (0.5 mΩ, 0 to 0.5 MHz) | 300 A Shunt
| 300 A Shunt with Cables (0.1 mΩ, 0 to 1 MHz) | 500 A Shunt
| 500 A Shunt with Cables (0.1 mΩ, 0 to 0.2 MHz) | LG Shunt Cables
| LG Shunt Cables for High Current Shunts |
Cables & Hardware
| Measurement Cable Set
| Measurement Cable Set (for one power phase) |
Other Accessories
| Norma Printer Paper
|
|
※ 상세사양
General Specification
| 입출력수 | Fluke Norma 4000:
| 1 to 3 | Fluke Norma 5000:
| 3, 4 or 6 |
| 무게 | Fluke Norma 4000:
| Approx. 5 kg (11 lb.) | Fluke Norma 5000:
| Approx. 7 kg (15 lb.) |
| 크기 | Fluke Norma 4000:
| 150 mm x 237 mm x 315 mm (5.9 in x 9.3 in x 12.4 in) | Fluke Norma 5000:
| 150 mm x 447 mm x 315 mm (5.9 in x 17.6 in x 12.4 in) |
| 내장 프린터 | Fluke Norma 4000:
| No | Fluke Norma 5000:
| Yes (optional) |
| 디스플레이 | | Color, 5.7“ / 144 mm - 320 x 240 pixel | | User-selectable background lighting and contrast. |
| 주파수대역 | | dc to 3MHz or dc to 10MHz depending on input module |
| 기본정확도 | | 0.2%, 0.1% or 0.03% depending on input modules |
| 샘플링 | | 0.33 MHz or 1 MHz depending on input modules |
| 입력전압 |
| 입력전류(direct, not via shunt) | | 0.03 mA to 20 A depending on input module |
| 메모리(for Configurations) |
| 메모리(for Settings) |
| Fast Fourier Transformation (FFT) |
| RS232/USB 인터페이스 |
| PI1 Process interface (8 analog/impulse inputs and 4 analog outputs) |
| IEEE 488.2/GPIB interface (1 MBit/s Ethernet / 10 MBit/s or 100 MBit/s) |
| Fluke NormaView PC 소프트웨어 (for data download, analysis & report writing) |
|
Basic Functions
| Fast Fourier Transformation (FFT) | | 그래픽 고조파계산 동시에 3개의 Bar-graph 디스플레이. | | 측정값: U, I, P per phase | | Order: 1st to 40th harmonics, maximum half sample frequency |
| Digital Oscilloscope (DSO) | | Simultaneous display of up to 3 measured values on sample level. Quick view of curve form and distortion. |
| Integration function (energy) | | Simultaneous display of up to 6 configurable numeric values. Start/Stop conditions and positive negative direction available. |
| 벡터 디스플레이 | | Vector display of HO1 up to 6 signals. For easy testing of the right connection of the instrument and quick overview of the phase angle of each signal. |
| 레코더 | | Display of average values over time for trend determination. |
| RAM data memory | | Storing of sample and average values; setting of start and stop conditions. | | From the RAM approximately 4 MB are available for the storage of measured values. |
| Configuration | | Set up the analyzer to measure and display data in the format required. |
|
Ambient Conditions
| Working Temperature Range | | 5 °C to 35 °C (41 °F to 95 °F) |
| Storage Temperature Range | | -20 °C to 50 °C (-4 °F to 122 °F) |
| 하우징 | | Fluke Norma Power Analyzers are extremely compact and equipped with a solid metal case to meet stringent EMC requirements. |
| 기후조건 | | KYG DIN 40040, max. 85 % relative humidity, non-condensing. |
| 전원 | | 85 V ac to 264 V ac, 50 Hz to 60 Hz, dc 100 to 260 V, ca. 40 VA European plug with switch. Binding post for current available on some models. |
| Measuring Inputs | | Safety sockets 4 mm, 2 for each input. External shunt connection over BNC socket. |
| 동작 | | Membrane keyboard with cursor – function keys and direct functions. |
| Connections | | Rear panel of the 3-phase Analyzer |
|
Measured Values
| | | Non-gapping calculation of averaged values for each phase. In three phase system additionally calculation of total power and averaging of V and I of the three phases. The fundamental H01 will be calculated in synchronous mode also for these values. | | Urms effective value, Urm rectified mean, Um mean value | | Up-, Up+, Upp peak values | | Ucf crest factor Ucf, Uff form factor | | Ufc fundamental content | | Uthd distortion factor DIN, IEC | | Irms effective value, Irm rectified mean, Im mean value | | Ip-, Ip+, Ipp peak values | | Icf crest factor Icf, Iff form factor | | Ifc fundamental content | | Ithd distortion factor DIN, IEC | | P active power [W] | | Q reactive power [Var] | | S apparent power [VA] | | ë, cos. phase angular | | Integral function for active power P, reactive power Q, apparent power S, voltage (Um) and current (Im), | | Number of digits 4 or 5 dependent on measured value. |
|
Frequency and Syncronization
| 범위 | | DC and 0.2 Hz to sample rate |
| 정확도 | | ±0.01 % of measured value (reading) |
| | •
| Channels which can be selected: all U/I or external input. | •
| One of three low pass filter with different frequencies can be switched into the signal. | •
| The frequency is always visible on the top of the screen. | •
| The BNC synchronization socket on backside of the instrument can be used either as input or output. | •
| The input signals can be measured up to the sample rate of the power phase. The maximum level must not be higher then 50V. | •
| The output signal is a pulsed 5Volts TTL signal (frequency depends on the measured synch frequency). |
|
Configuration Memory
|
| | Up to 15 user configurations can be saved into a permanent memory and reloaded later on. Changes that were not saved are lost after switching off the instrument. |
|
Interface
|
| | 펌웨어 및 PC로의 데이터통신을 위한 RS232. 프린터는 외부컨버터로 연결될 수 있습니다. |
| 옵션 | | IEEE 488.2 / 1 MBit/s | | Ethernet / 10 MBit/s or 100 Mbit/s |
|
Standards and Safety
| 안전등급 | | EN 61010-1 / 2nd Edition 1000 V CAT II (600V CAT III) | | Degree of pollution 2, safety Class I | | EN 61558 for transformer | | EN 61010-2-031/032 for accessories |
| 최대 입력값 | | For voltage inputs Measurement range 1000 Veff, 2 kVpeak | | For current inputs Measurement range 10 Aeff, 20 Apeak |
| 테스트전압 | Net input
| case (protective conductor): 1.5 KV AC | Net connection
| Measurement input: 5.4 kV AC | Measurement inputs
| Case: 3.3 kV AC | Measurement input
| input: 5.4 kV |
| 전자기 호환성 | Emission:
| IEC 61326-1, EN 50081-1, EN 55011 Class B | Immunity:
| IEC 61326-1 / Annex A (industrial sector), EN 50082-1 |
|
|
|
|
|