· A4 사이즈의 로거, 표준 30ch. 최대 60ch 사용가능(옵션 장착시) | |||
· 대용량 메모리와 데이타 보호기능으로 장시간의 데이타저장에 안성맞춤 | |||
· 온도,습도,압력등의 환경변화에 의한 피측정물의 저항값 변화 기록가능. | |||
· 10m sec의 고속샘플링 | |||
· USB 메모리 사용가능. | |||
Analog input UNIVERSAL UNIT LR8501 Actual functionality will depend on combination of units installed |
[No. of channels] 15 analog channels; isolated scanning method input (4 terminals: push-button type) | ||
[Voltage] 10 mV to 100 V, 1-5 V f.s. 10 ranges, Max. resolution: 500 nV | |||
Note: Isolated between channels and from each channel to chassis | |||
[Temperature: Thermocouples] -200°C to 2000°C (depends on sensor), 3 ranges (K, J, E, T, N, R, S, B, W), Max. resolution 0.01°C | |||
Note: Isolated between channels and from each channel to chassis | |||
[Temperature: Pt 100, JPt 100 sensor] -200°C to 800°C, 3 ranges, Max. resolution 0.01°C | |||
Note: Not isolated between channels | |||
[Resistance] 10 Ω to 200 Ω f.s. 4 ranges, Max. resolution 0.5 mΩ | |||
Note: Not isolated between channels | |||
[Humidity] 100 % rh f.s. 5.0 to 95.0 % rh (when using Z2000), resolution 0.1 % rh | |||
Note: Not isolated between channels nor from each channel to chassis | |||
[Max. rated voltage between isolated input channels] 300 V DC | |||
Note: Isolated from each channel to chassis |
[Max. allowable input] ±100 V DC | ||
[Max. rated voltage from isolated terminals to ground] 300 V AC, DC | |||
Analog input VOLTAGE/TEMP UNIT LR8500 Actual functionality will depend on combination of units installed |
[No. of channels] 15 analog channels; isolated scanning method input (2 terminals: M3 screw type) | ||
[Voltage] 10 mV to 100 V, 1-5 V f.s. 10 ranges, Max. resolution: 500 nV | |||
Note: Isolated between channels and from each channel to chassies | |||
[Temperature: Thermocouples] -200°C to 2000°C (depends on sensor), 3 ranges (K, J, E, T, N, R, S, B, W), Max. resolution 0.01°C | |||
Note: Isolated between channels and from each channel to chassies | |||
[Temperature: Pt 100, JPt 100 sensor] [Resistance] not available | |||
[Humidity] 100 % rh f.s. 5.0 to 95.0 % rh (when using Z2000), resolution 0.1 % rh | |||
Note: Not isolated between channels nor from each channel to chassies | |||
[Max. rated voltage between isolated input channels] 250 V DC | |||
[Max. allowable input] ±100 V DC | |||
Note: Isolated from each channel to chassis |
[Max. rated voltage from isolated terminals to ground] 300 V AC, DC | ||
Caution: Max. voltage from terminals to ground without damage | |||
Pulse, Digital input | [No. of channels] 8 channels, pulse / digital selectable for each channel, M3 screw terminal, not isolated, common ground | ||
[Pulse totalization] 0 to 1000 M pulse, 1 range (No-voltage 'a' contact; normally open, open collector or voltage input), | |||
Max. resolution 1 pulse | |||
[Pulse revolutions] 0 to 5000 /n (r/s) f.s. 1 range (same as Pulse totalization input signal condition), resolution 1/n (r/s) | |||
Note: "n" is the number of sensor output pulses per revolution, 1 to 1000 | |||
[Digital input] Record logical "1" or "0" at each sampling | |||
[Max. rated voltage between input channels] Not isolated | |||
[Max. allowable input] 0 to 50 V | |||
Recording intervals | 10 ms to 50 ms, 100 ms to 1 hour, 19 selections (All input channels are scanned at high speed during every recording interval) | ||
Note: limited by using channels at 10 ms to 50 ms interval | |||
Digital filter | Select from OFF/ 50 Hz/ 60 Hz (the cut-off frequency is automatically set) | ||
Data storage | Internal memory: 8 M-words, Data storage media: CF card or USB memory | ||
(Only data recorded to a genuine HIOKI CF card is guaranteed) | |||
LAN interface | 100BASE-TX, Functions: Data acquisition using bundled software or PC commands, FTP server, FTP client, | ||
HTTP server function, or E-mail system | |||
Note: LAN communication support planned from software Ver. 1.20 | |||
USB interface | USB 2.0 High-speed capable, series mini-B receptacle | ||
Functions: Data acquisition using bundled software or PC commands, Transfer data from the CF card to a PC via USB drive mode | |||
Note: Data transfer not possible from USB memory sticks | |||
Display device | 5.7 inch TFT color liquid crystal display (640 × 480 pixel) | ||
Other functions | Save waveform data in real time to the CF card or USB memory stick, Numerical value calculations, Waveform calculations, and others | ||
AC Power | Using the AC ADAPTER 9418-15 (100 to 240 V AC, 50/60 Hz), 7 VA | ||
DC Power | Using the BATTERY PACK Z1000 (optional accessory), Continuous use 5 hr, External power: 10 to 28 V DC | ||
(Please contact your HIOKI distributor for connection cord) | |||
Dimensions & Mass | 272 mm (10.71 in) W × 182.4 mm (7.18 in) H × 66.5 mm (2.62 in) D, 1.8 kg (63.5 oz), | ||
(LR8400-20 main unit, excluding the Battery Pack 370 g/ 13.1 oz) | |||
Accessories | Detailed operating manual ×1, Measurement guide ×1, AC ADAPTER 9418-15 ×1, USB cable ×1, | ||
CD-R (data collection software "Logger Utility") ×1 |
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다